Share Print
PV100 FX Flexible Solar Panel
PV100 FX Flexible Solar Panel | 100W (Set of 2) - Image 2
PV100 FX Flexible Solar Panel | 100W (Set of 2) - Image 3
Share

PV100 FX Flexible Solar Panel | 100W (Set of 2)

in Solar Panels
Sku: BLU-PV100FX

US$329.00

Available on backorder

Description

PV100 FX Flexible Solar Panel | 100W (Set of 2)

Solar that bends to fit your setup

Not every roof is flat, and not every adventure sits still. The PV100 FX is a flexible, ultra-thin solar panel built to curve over the surfaces rigid panels can’t the arched roof of an RV, the deck of a boat, a camper shell, or any uneven mount where a heavy glass panel simply won’t sit. This is a set of two 100W panels, giving you up to 200W of combined solar power to keep your batteries charged wherever the road or water takes you.

For island life coastal runs, boat days, off-grid weekends under the Jamaican sun it’s clean power that goes where you go and mounts where you need it.

Flexible and thin fits curves rigid panels can’t

The PV100 FX flexes to hug curved and uneven surfaces, so you can mount it flush on a boat cabin, RV roof, or trailer without brackets fighting the shape. Its slim profile keeps a low, tidy footprint that won’t catch wind or spoil your setup’s lines.

Ultra-light at just 2.2 kg

At only 2.2 kg per panel, the PV100 FX is featherweight compared with rigid alternatives easy to lift onto a rooftop, carry to the dock, or pack for a portable setup. Less weight means less strain on your vehicle and less effort for you.

Steady 100W output, 23.4% efficiency

Each panel delivers up to 100W of maximum output, and with two in the set you’ve got 200W on tap for longer trips and deeper off-grid stays. A 23.4% conversion efficiency means stable, dependable solar intake reliable energy while you’re on the move, not just in perfect conditions.

Durable HPC lamination

The PV100 FX is finished with tough HPC lamination that’s weather-resistant and built to last, standing up to sun, spray, and the knocks of outdoor use exactly what a panel living on a boat or RV roof needs.

Specifications

Set 2 × PV100 FX panels
Max output 100W per panel (up to 200W combined)
Conversion efficiency 23.4%
Weight 2.2 kg per panel
Design Flexible, ultra-thin — adapts to curved or uneven surfaces
Surface Durable HPC lamination (weather-resistant)

Ideal for

  • RV and campervan rooftops
  • Boats, yachts, and marine setups
  • Curved or irregular surfaces where rigid panels won’t fit
  • Lightweight, low-profile off-grid and portable builds

Power your journey

If your solar has to fit a curve, save weight, and take the weather, the PV100 FX set is made for the job. Add it to your cart, and if you’d like help matching these panels to your BLUETTI power station and the right connection cables, get in touch we’ll make sure your setup works together from day one.

Feature

Feature

Get More Power, Faster

Most solar panels convert only 15–21% of sunlight. The PV100 FX delivers up to 23.4% efficiency, turning more sunlight into usable energy. Charge your devices faster and enjoy reliable power to keep your day moving.

Power Anywhere, Travel with Ease

Whether you’re in your RV, out on the boat, or chilling on your balcony, this solar panel has you covered. Set it up easily, and it delivers reliable, portable solar energy. Simple, convenient, and ready to go wherever life takes you.

Bendable and Ready for Any Condition

Flat roof? Curved surface? Uneven setup? No problem. The 240° bendable design adapts to your space, capturing maximum sunlight. With IP67 protection and an operating range of -25°C to 65°C, the PV100 FX performs reliably in nearly any environment.

Durable Materials for Lasting Power

Built with high-transparency HPC film, cushioned with EVA, and sealed with a waterproof LBC backsheet, the PV100 FX is designed for strength and long-lasting reliability. Count on consistent, efficient solar power season after season.

Easy, Drill-Free Installation

Fast to install and simple to relocate. Just hang the PV100 FX with straps or stick it in place using the adhesive backing. Get your solar power running in minutes, with minimal effort.
Specifications

Specifications

Specifications

PREVIEW

POWER

Maximum Power:
100W
Cell Lamination:
HPC (High-Performance Coating)
Cell Type:
Monocrystalline Silicon
Cell Efficiency:
Up to 23.4%
Open Circuit Voltage (Voc):
41.4V
Short Circuit Current(Isc):
3.05A

GENERAL

Connector:
Standard MC4 Connector
Weight:
4.85lbs/2.2Kg
Dimensions (Unfolded):
39.4 × 23.2 in / 1,000 × 590 mm
Operating Temperature:
-10°C to 65°C (14°F to 149°F)
Best Working Temperature:
25°C (77°F)
Warranty:
12 Months

IN THE BOX

User Manual

BLUETTI PV100 FX Flexible Solar Panel | 100W User Manual

DownloadDownload Now >

FAQs

FAQs

Q1: Is the PV100 FX solar panel waterproof?

A: Not fully waterproof. The PV100 FX is IP67 water-resistant, meaning it can handle splashes and brief exposure to water. However, avoid leaving it in the rain or submerged for extended periods.

Q2: Do flexible solar panels require regular cleaning?

A: Yes, regular cleaning helps maintain optimal performance. Dust or dirt can block sunlight and reduce efficiency. Simply wipe it with a soft cloth or use water spray, ensuring no scratches are left behind.

Q3: What’s the difference between flexible, foldable, and glass solar panels?

A:

Flexible panels: Lightweight, thin, and bendable, ideal for curved surfaces like RV roofs or boat decks.
Foldable panels: Designed for temporary use and easy transport.
Glass panels: More fragile and less versatile for installation, but typically offer higher power outputs.

Flexible panels, like the PV100 FX, are easier to install and less prone to damage.

Q4: Can the PV100 FX work with other solar chargers or MPPT controllers?

A: Yes, as long as its open-circuit voltage (Voc) and current match the input requirements of your charger or controller.

Q5: Can the PV100 FX be used with other solar panels?

A:
It is not recommended, as this may impact the efficiency and power output of your whole solar system.

Q6: Can I connect multiple PV100 FX panels together?

A: Yes, you can connect them in series for higher voltage or parallel for higher current. Make sure the total open-circuit voltage (Voc) and current stay within your charger’s specs.

The RV Solar System supports up to 16 PV100 FX panels for a total of 1,600W solar input.

Q7: How to install the PV100 FX on an RV or boat?

A:

Use adhesive, straps, or ropes through the corner holes for a secure installation. For step-by-step instructions, watch the RVSolar Installation video on the BLUETTI Support YouTube channel.

Q8: Can the PV100 FX be used in an off-grid home setup?

A:

Yes.

Q9: Can I step on the PV100 FX after installation?

A: We recommend avoiding stepping on the panel  as it may damage the solar cells, reduce performance, or cause permanent damage.

Q10: Can I use the PV100 FX to charge third-party power stations?

A:

Yes, as long as the third-party power station:
1. Uses MC4 connectors.
2. Has compatible voltage specifications that match the output of the PV100 FX.

 

Similar Products