Wherever the sun shines, the SP100L is ready to power up! By working with a solar generator, it seamlessly collects, converts, and stores clean, renewable solar energy. Whether you’re traveling, camping, or simply need a daily backup, the SP100L ensures solar energy is within reach around the clock.
Built for Portability – Power Wherever You Go
Experience the freedom of energy on the move. The SP100L solar panel is designed for ultimate portability, with a lightweight, foldable design that makes it easy to carry and set up anywhere power is needed.
Efficient Charging – Unleash Solar Power at Its Best
Harness the full potential of the sun. The SP100L is engineered with premium solar cells that deliver up to 23.4% high efficiency. So you can count on a quick and efficient power supply to keep your devices and power stations charged and ready.
Green & Clean Power for a Sustainable Tomorrow
The SP100L solar panel offers a renewable energy solution that reduces your carbon footprint while providing consistent power. Forget about those noisy, polluting generators and embrace an eco-friendly solar energy that aligns with your commitment to protecting the environment without sacrificing convenience.
Universal Compatibility and Quick Setup
Built-in with MC4 connectors, the SP100L is compatible with all BLUETTI portable power stations and most solar generators on the market. Setting it up is incredibly simple, requiring just a few steps to get you harnessing solar power in no time.
Under ideal conditions, the 100W solar panel can produce up to 90W of power. Actual output can vary based on factors like sunlight intensity, weather, temperature, shading, and panel orientation. For the best results, try to position the panel to get as much direct sunlight as possible.
Q2: How to set up the solar panel for optimal performance?
A:
1. After unfolding the panel, position it to face the sun directly, keeping the surface free from shadows (like from trees or buildings).
2. In the morning or late afternoon, try tilting the panel at a steeper angle to capture more sunlight. At midday, laying it flat is usually most effective.
Q3: Is the solar panel waterproof?
A:
The SP100L is rated IP67, so it’s splash-resistant but not fully waterproof. It’s best not to leave it in the rain or submerge it in water for long periods.
Note: If the solar panel is submerged, do not leave it underwater for more than 5 hours. Let it dry completely before using it again.
Q4: Can the SP100L be connected with other brands or types of solar panels?
A:
The SP100L is compatible for connection in series or parallel with BLUETTI’s PV100L and PV100D models. However, we recommend avoiding the connection with other brands or types of solar panels. Differences in voltage and current may cause performance issues or potential safety concerns.
Q5: Can the SP100L charge third-party power stations?
A:
Yes, provided that the power station:
1. Uses MC4 connectors, and
2. Matches the solar panel’s voltage specifications.
Q6: What is the compatibility of the SP100L solar panel?
A:
The SP100L is compatible with all BLUETTI portable power stations.
Here are the approximate charging times for some popular models (under ideal sunlight conditions):
● EB3A (268Wh): 3.2 hours with 1×SP100L
● AC2A (204Wh): 2.5 hours with 1×SP100L
● AC50B (448Wh): 5 hours with 1×SP100L
● AC60 (403Wh): 4.5 hours with 1×SP100L
● AC70 (768Wh): 4.4 hours with 2×SP100L
Note: For other BLUETTI or third-party products, refer to the product manual or reach out to our customer support to verify compatibility.
Q7: How to figure out how many solar panels can be used on a power station?
A:
1. Check your power station’s solar input limits, including voltage, current, and power.
2. Verify the solar panel’s specs, such as open-circuit voltage (Voc), maximum power current (Imp), and maximum output power (Pmax).
3. Decide how to connect your panels and calculate how many you can use:
● In series: This increases voltage while keeping the current the same.
For example, if your power station can handle 60V and each panel has a voltage of 19V, you can connect up to 3 panels in series (60V ÷ 19V = 3.15).
● In parallel: This keeps voltage the same but adds the current.
For example, if your power station can handle 20A and each panel provides 5A, you can safely connect up to 4 panels in parallel (20A ÷ 5A = 4).
Of course, no matter how you connect the panels, make sure the total voltage and power stay within your power station’s limits.
Q8: Can this solar panel be installed on a roof or car?
It’s not recommended to mount this panel directly on roofs or cars.
No products in the cart. 